Holes that set your fence up to last
A fence is only as strong as the posts holding it, and posts are only as good as the holes they sit in. In the blackland and clay soils around Cameron, Temple and Taylor, ground that is soft as butter in a wet April can turn to brick by August. Hand digging in those conditions wears out a crew and often leaves shallow, crooked holes that let posts lean.
We dig post holes with powered equipment so each one goes to the depth and diameter your project needs. Corner and brace posts on a ranch fence, H-braces at gates, pole barn columns and deck footings all have different requirements, and we take the time to understand yours before the first hole goes in. Consistent holes make setting posts faster and the finished line straighter.
Planning the line before we dig
Good post work starts with layout. We walk the fence line or building footprint with you, confirm property corners if you have them marked, and talk through spacing, gate locations and where braces belong. On longer runs we string the line first so the holes follow a true path instead of wandering around trees and low spots. That small step keeps the finished fence looking right for years.
We also ask about buried water lines, electric runs to wells or barns and anything else underground before we dig. If the ground is too wet to work cleanly, we will say so and reschedule rather than leave you with muddy, collapsed holes. Rocky spots happen in parts of Bell and Williamson County, and if we hit one we will talk with you about options instead of guessing.
What's included
- Layout walk and line stringing
- Powered post hole digging to the depth you need
- Holes for ranch fence, corners and H-braces
- Pole barn and carport column holes
- Deck and porch footing holes
- Spoil piled neatly or spread on request